Forum: New Products |
Elation announces beam-spreading light-shaping filters for LED fixtures, which attach to a gel frame or the inside of an LED's casing in minutes-- to add 10°, 20°, 30° or a linear beam shape effect to its beam angle that's ideal for stage or wall grazing, without requiring complicated or permanent alterations to the fixture.
Elation Light Shaping Filters offer a great way for lighting designers to get more versatility from their LED fixtures for a relatively small investment. Using one of these filters, you can widen the beam of a narrow beam angle LED par like our Opti Tri 30 and convert it into a fixture suitable for a stage or wall wash.
Elation Light Shaping Filters have been designed to preserve as much power as possible while dispersing light. The Elation products provide up to 92% light transmission, while standard diffusion filters typically transmit only 60% of the light.
Elation Light Shaping Filters are available in four different beam angles: 10° LSF10-24), 20° (LSF20-22), 30° (LSF30-24) and 60°x1° (LSF601-24). With the first three versions, the beam angle is widened both vertically and horizontally - say 10° in both directions. The 60°x1° version broadens the angle 60° horizontally and only 1° vertically, making it great for long, flat wall washes.
Light Shaping Filters can be used with LED fixtures made by any manufacturer, not just those from Elation. The filters come in large sheets, allowing users to cut them in the sizes needed. Each sheet measures 24"x 24" (except the 20° version which is 24"x 22"). If outfitting a 6" LED par can, for example, 16 filters could be cut from a 24"x 24" sheet, making the cost per fixture very affordable.
Each Elation Light Shaping Filter sheet carries an MSRP of $139.99.